Skip to content

TMV servicing across the UK

How a TMV job works

TMV Servicing Specialists runs every job the same way, wherever it is in the UK. Here is what happens from the moment you send an enquiry.

A thermostatic mixing valve with a temperature test gauge fitted to its outlet

Five steps

  1. 1

    Send an enquiry

    Use the form to tell us where the valves are, roughly how many there are and what you need. A photo of the valve and its label helps.

  2. 2

    We match the job

    Alex reads every enquiry and matches the job to a partner engineer who covers your part of the UK.

  3. 3

    You agree the price

    We confirm the work and the price before anything is booked, so nothing starts that you have not agreed.

  4. 4

    The visit

    The engineer tests, services or replaces the valves as agreed and records the readings before and after.

  5. 5

    Records and next steps

    You get the paperwork for each valve and a note of anything that still needs attention, with the next date it is due.

What helps us price the job

  • Where the valves are

    The site postcode and the type of building: a house, a block of flats, a care home, a school, an office.

  • How many there are

    A rough count is enough. If you do not know, say so and a survey can be the first step.

  • What the valves are

    The make and model if a label is visible, or a photo of the valve and its surroundings.

  • What is going wrong

    Water too hot, too cold or changing, low flow, or simply a service that is due.

  • Access

    Whether the valves sit behind panels, in occupied rooms or in areas that need a key, a permit or an escort.

What a visit usually leaves you with

After a test or service you should expect the readings for each valve: the hot and cold supply temperatures, the mixed temperature at the outlet, and the result of the fail-safe test, before and after any work. Where a valve could not be reached or needs more work, that is written down too, with what is needed and why.

For buildings with several valves, those records can be kept as an asset register, so the next due date for each valve is in one place and ready for an inspector, an insurer or your own water safety group.

Questions about the process

See all questions

Who carries out the work?

A partner engineer who covers your area. Alex matches the job and stays your point of contact throughout.

Do I agree the price first?

Yes. The work and the price are confirmed with you before anything is booked.

Can work be done without shutting off the whole building?

Usually. Most valves have isolation valves so one outlet can be worked on at a time. Where that is not possible, a shutdown is planned with you in advance.

What if a valve cannot be repaired?

You are told why, and given the option of a replacement before any further work goes ahead.

Do you work across the whole UK?

Yes, across England, Scotland, Wales and Northern Ireland.

Ready to get your TMV serviced?

Tell us which valve you have and what you need done, and we will come back to you.

Send an enquiry
A newly fitted thermostatic mixing valve on copper pipework beside a boiler