Skip to content

TMV servicing across the UK

TMV servicing in Wales

TMV Servicing Specialists arranges thermostatic mixing valve servicing, testing and repair in Wales, from Anglesey to the Vale of Glamorgan. Welsh healthcare, care and housing settings answer to Welsh guidance and law, which this page summarises.

A finished valve installation inside an open plant cupboard lit by a small window

How things work in Wales

Health boards in Wales work to WHTM 04-01, the Welsh edition of the guidance on safe water in healthcare premises. It covers the same ground as the English HTM, including how thermostatic mixing valves are commissioned and tested in service, so a Welsh hospital or clinic should expect its TMV records to refer to WHTM 04-01. Care homes and other regulated care services in Wales are inspected by Care Inspectorate Wales, which looks for evidence that hot water risks to residents have been assessed and controlled.

Wales has its own Building Regulations, separate from England's since devolution, with its own Part G. It carries a similar 48°C limit on hot water supplied to baths in new homes. Water fittings in Wales still fall under the Water Supply (Water Fittings) Regulations 1999. Rented homes are governed by the Renting Homes (Wales) Act 2016, which requires landlords to keep a dwelling fit for human habitation, judged against hazards drawn from the HHSRS, scalding among them. HMOs are licensed under Welsh rules.

Most of Wales is supplied by Dŵr Cymru Welsh Water, with Hafren Dyfrdwy serving parts of north-east and mid Wales, including much of the Wrexham area. Upland reservoirs give most Welsh homes soft water, so TMV strainers and cartridges scale more slowly than in southern England. Debris from older mains and from internal pipework still reaches the strainers, though, and in buildings with long pipe runs or intermittent use the sediment can be enough to slow flow and upset the mix.

What TMV owners in Wales should know

  • Quote the Welsh documents

    WHTM 04-01 and Welsh Part G are the references a Welsh inspector or building control officer will expect, not their English counterparts.

  • Soft water still leaves debris

    Valves in Wales may show little scale, yet strainers can still collect grit and corrosion products from older pipework, especially after mains work in the street.

  • Renting Homes duties

    Under the Renting Homes (Wales) Act, a landlord must keep the home fit for habitation; a scalding risk at a bath or shower can count against that.

  • Rural sites need planning

    In Powys, Ceredigion or Gwynedd, a visit may involve long travel. Listing every valve and building in your enquiry helps fit the work into one trip.

Places across Wales

All of Wales is covered through the partner engineer network. These are some of the places we hear from.

  • CardiffThe capital, with offices, hotels, a large university and much of Wales's hospital capacity.
  • SwanseaCoastal city with student housing, care settings and older terraced streets.
  • NewportA city with Victorian terraces, new estates and commercial buildings close to the M4.
  • The ValleysLong rows of terraced homes, schools and community buildings in Rhondda, Merthyr, Caerphilly and beyond.
  • WrexhamThe largest town in north Wales, partly supplied by Hafren Dyfrdwy.
  • GwyneddSnowdonia, holiday lets, outdoor centres and a university town in Bangor.
  • Anglesey and ConwyCoastal towns with hotels, guest houses and retirement housing.
  • PembrokeshireHoliday accommodation and rural care settings in the far south west.
  • PowysThe largest county by area and among the most sparsely populated, with small towns and scattered sites.
  • Ceredigion and CarmarthenshireMarket towns, university buildings in Aberystwyth and rural care homes.

TMV questions from Wales

See all questions

Which guidance applies to a Welsh hospital or clinic?

WHTM 04-01. Its TMV test approach mirrors the English document, but Welsh settings should reference the Welsh edition.

Is the bath temperature limit the same in Wales?

Welsh Part G carries a similar 48°C limit on hot water to baths in new homes, but it is a separate Welsh regulation.

Who supplies water in Wales?

Mostly Dŵr Cymru Welsh Water; Hafren Dyfrdwy supplies parts of north-east and mid Wales.

Do soft-water valves in Wales still need strainer cleaning?

Yes. Scale is slower, but grit and sediment still collect, so strainers are checked and cleaned at each service or as the risk assessment directs.

TMV work anywhere in Wales

Give us the town or county, the type of building and how many valves there are. Alex matches the job to a partner engineer covering that part of Wales and the price is agreed before work starts. Complete the form and press Send an enquiry.

Send an enquiry