Skip to content

TMV servicing across the UK

TMV servicing in Northern Ireland

TMV Servicing Specialists arranges thermostatic mixing valve servicing, testing and repair in Northern Ireland, from Belfast to Fermanagh. Northern Ireland has its own regulators and its own water fittings law, so the references differ from the rest of the UK.

A serviced thermostatic mixing valve in a plant cupboard against painted brickwork

Regulation and water in Northern Ireland

Health and safety at work in Northern Ireland is enforced by the Health and Safety Executive for Northern Ireland (HSENI) and district councils rather than the GB HSE. HSENI publishes its own version of the Legionella code of practice, L8, which sets the same basic temperature controls: stored hot water held at around 60°C, and outlets reaching at least 50°C within a minute. Thermostatic mixing valves sit at the point where those Legionella controls meet scald protection, so they appear in most Northern Ireland written schemes for care and health premises.

Hospitals, care homes and other regulated services in Northern Ireland are inspected by the Regulation and Quality Improvement Authority (RQIA), which expects providers to manage the risk of scalding from hot water. Health and social care estates in Northern Ireland follow their own adoption of the healthcare water guidance used elsewhere in the UK. Fittings connected to the public supply must meet the Water Supply (Water Fittings) Regulations (Northern Ireland) 2009, and houses in multiple occupation are licensed under Northern Ireland's own HMO legislation.

NI Water supplies the whole of Northern Ireland, and most of its water is soft, drawn from loughs, rivers and upland reservoirs. Scale builds on TMV strainers and cartridges more slowly than in hard-water parts of England, but sediment and debris still gather, particularly in older buildings and where pipework has been altered. Many Northern Ireland homes and smaller buildings also have cold water storage tanks in the roof space, which affects supply pressure and is one reason the valve's approval should be matched to the site.

What TMV owners in Northern Ireland should know

  • HSENI, not HSE

    Your Legionella and water safety arrangements in Northern Ireland answer to HSENI's L8 and guidance, so written schemes and records should refer to them.

  • RQIA looks at hot water risk

    Registered services in Northern Ireland should be able to show RQIA their TMV readings, fail-safe results and the actions taken when a valve failed.

  • Tank-fed supplies are common

    Where hot and cold come from a roof tank, pressures are low and can be unbalanced. A valve approved for low-pressure use is often needed.

  • NI water fittings law

    New or replacement valves in Northern Ireland should be installed to the 2009 NI fittings regulations, including the right backflow protection.

Places across Northern Ireland

All six counties are covered through the partner engineer network. These are the main towns and cities enquiries come from.

  • BelfastThe capital, with terraced streets, apartment blocks, hospitals, universities and offices.
  • Derry~LondonderryThe north west's main city, with older terraces, student housing and care settings.
  • LisburnA city just south west of Belfast, with suburban estates and commercial buildings.
  • NewryA border city with a busy retail centre and surrounding rural communities.
  • ArmaghA small cathedral city with schools, care settings and period buildings.
  • BallymenaA market town in County Antrim with a mix of housing and care provision.
  • EnniskillenThe county town of Fermanagh, serving a lakeland area with holiday accommodation.
  • ColeraineA university town near the north coast, close to Portrush and Portstewart.
  • Bangor and North DownCommuter towns along Belfast Lough with retirement housing and hotels.

TMV questions from Northern Ireland

See all questions

Does the HSE's L8 apply in Northern Ireland?

Northern Ireland has its own version published by HSENI. The temperature controls are the same in substance, but HSENI is the body to reference.

Who inspects care homes in Northern Ireland?

The RQIA. It expects providers to manage hot water and scalding risks and to keep records of how they do it.

Which water fittings rules apply in Northern Ireland?

The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009, enforced by NI Water.

Is the water in Northern Ireland hard?

Generally no; most of it is soft. Strainers still collect sediment and need checking at each service.

TMV work anywhere in Northern Ireland

Let us know the town, the type of building and how many valves there are. Alex matches the job to a partner engineer in Northern Ireland and the price is agreed before work starts. Fill in the form and press Send an enquiry.

Send an enquiry